Having seen some APS double exposures on Facebook and Instagram I decided to have a go myself. I have previously reused found APS film by moving the cartridge symbol back to one with a screwdriver. So I figured reusing a whole roll shouldn’t be that tricky either.

For the first trial I put the shortest roll of film I had, a 25exp 200iso Truprint, in a Canon IX7. I chose that camera as it is the only APS camera I have where I can override the film’s preset iso. I set the camera to an ISO of 80 and shot the first pass of the film in my garden and local park. I took photos of textures and nature. I really didn’t want to put too much effort into finding locations as I wasn’t sure it would work. The following day, while I was completing a Wherigo cartridge, I took the camera along for the second pass. The camera was still set at 80 iso. As all APS is out of date I wanted to overexpose the film slightly. If you use a regular point and shoot I actually think expired film could be used twice at its regular iso with no adjustments. For the second pass I took shots of buildings and street furniture. Again, I did not put much effort into the process.

So how did they turn out, these shots that I did randomly with little effort or planning?

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

Well not bad if I do say so myself 🙂

The magnetic aspect of the film seemed to assure that the two passes lined up perfectly. I think that would be true if you chose to use two different camera. I think that will be my next experiment. It certainly was easier to create these than with 35mm film in a camera without a multiple exposure feature. Plus this way you can use two different locations and times. With regular double exposures on film you have to take one straight after the other, not so with these. That gives a whole new scope to the genre.