Tag Archives: lock

Chinon CE-4

I love this camera. Though it isn’t my best camera or my most sophisticated…it has Spiderman all over it!!! What’s not to love?

I had seen a few of these cameras online with the skin either off or falling off. That made them cheap, so I bought one. I was looking for a replacement body for some Pentax lenses anyway. As soon as it arrived I set to recovering it and just happened to be reading a comic. I wonder??? Could my comic be a new cover? Yes it could. I cut it to the right size and glued it on. Gosh, I hoped the camera worked as I was already enamoured with it.

It was produced around 1980 and this excellent blog post compares it to the Pentax ME Super, which is great as I bought mine as a replacement for that camera. A friend had cheekily asked if I would swap that camera and I was reluctant as the prices are rising for the ME. But at the end of the day I don’t use it and I have lots of others. I still wanted a Pentax K mount, because I am me 🙂 So I decided to get this one. That blog post has all the information you might need for this camera.

I had recently been gifted an Ilford FP4 plus film so loaded that up and then took my camera everywhere with me. I just couldn’t stop looking at it and playing with it. That being said, it took me longer than usual to get through the film…and there were ghosts, trials, and tribulations.

Firstly, I took it to Harrogate and took a few shots before feeling like I was getting a massive migraine. So I headed home very quickly…I was right.

Then I took it to the exhibition in Blackpool, but it was raining so I didn’t take many shots there either. I just took a few inside, making good use of the 1.7 aperture.

Then I thought, well, I bought it to replace the ME Super so why not try out the Pentax lens. So for the next trip to Manchester I swapped the lenses. I was going there to hunt for ghosts as it was almost halloween. I managed to capture one before the mirror locked up and the camera became unresponsive 😦

Just before it died, it acted a little weird, the wind on acted oddly. As you can see the first two frames overlapped. I tried some new batteries, as they were LR44 they were easy to replace. But it had no effect, the camera was dead. I carried on the monster hunt using a Brownie and a very old film which didn’t turn out well either. It was supposed to be an experimental combination not my only camera.

Anyway, when I got home I decided to see if I could reset the mirror somehow. There was very little on the net, no fix that I could find. So I took off the bottom plate and had a look. I found a piece that moved and then tried to turn the electronic winder mechanism manually. Basically I was looking for anything that would move. Low and behold my experimenting worked and the mirror came down.

Here is a diagram of what I did.

A coin fits in the winder mechanism quite well making it easier to turn.

With the batteries back in and the lens back on I tried it a few times before putting the plate back on. All seemed well, but what had happened and would it happen again. I suspected the Pentax lens and with some more experimenting I found the issue. Though it is the same mount, the “A” setting totally confused the camera and caused the error.

I could repeat the error and fix it. In the end I decided to play safe and put the Chinon lens back on for the remainder of the film, which I took on a walk around my house. I also added a red filter just for fun.

And here is where another ghost appeared…I took another camera out on the walk to finish some infrared film I have, a Minolta XG2. That camera also suffered a mirror lock up. When I got home I took off the bottom plate and had a look. It seemed to work in exactly the same way as the Chinon.

Yatta, I have learned something new. So I then went on eBay and bought another Chinon CE-4 with a stuck winder and crappy skin for very, very small fee as it is listed as broken. I will see if this works on that one too, though now after posting this I might not be able to get them quite so cheaply.