This camera came as part of a job lot and it meant, finally, I had a clean instamatic. One that seemed to work perfectly, one that I might be able to use the Fakmatic in with relative ease. Having previously tried the adapter and failed, I had given it away. I cheekily asked the receiver if there was a possibility of getting it back and voila, another chance for the 3D printed device. There are other ways of using instamatic cameras, like reusing an old cartridge or adapting a 35mm roll as in this video but I really wanted to use the fakmatic.
This instamatic was manufactured from 1968 to 1973 and accepted 126 cartridge film. It has a fixed-focus lens and a two-speed shutter – 1/40sec and 1/80 sec. You select the speeds with the weather symbols on the front of the camera. The aperture is set at f11 for the 43mm lens.
If you watched the fakmatic video you will hear that you have to take a photo, then expose another photo while covering the lens in that pattern. That way you avoid getting overlapped images.
I seem to say this all the time recently, but the weather here has been awful. I managed to use the film ready for home developing over a few days. It was hard to know when the film was finished as I could not hear any squeaking and there were no numbers to check. So once I thought I had taken enough shots I put the cartridge in a light tight bag and felt for the sprockets of the film. I could still feel them, that mean there was still film left. So I took a few more shots, then I repeated the process. The next time I could not feel the sprockets meaning the film was finished.
There were some overlaps, and the beginning of the film was fogged where I loaded it into the camera. One side of the film had the image over the sprockets, but I didn’t scan those to include them.
I kept the camera set to cloudy which meant an exposure of 1/40th at f11. Mostly the exposure is ok, I over developed the film as I though the conditions meant they might be underexposed.
The results look very soft in terms of focusing. They remind me of something from a pinhole camera. All in all I did not enjoy using the camera and I am not keen on the results. I doubt I will be using an instamatic again. Though I have to change my opinion of the fakmatic, that worked really well.