As you may know I recently purchased a whole heap of box cameras. I am slowly going through them, cleaning and sorting them. I picked out two to try first, I wanted to chose something slightly different to the two brownies I have tried before.

This little camera looked markedly different from all the others in the box so it was first on my list to try. I think I should have used a banana for scale.

First produced in 1957 it was not on sale in the general market and was obtained by collecting coupons from various promotional deals. I found this out through this amazing Brownie resource. This website is the fountain of all Brownie related knowledge, though it does not give the aperture or speed on the camera page, both are set as there is no scope to change anything. Looking further into the website I found this explanation of all technical details. Using that information I could estimate f11 and 1/50th which was confirmed on this blog. That blog also tells you how to clean this camera. Luckily for me, my example was one of the few in the box that was in great condition. Oh and you can take multiple exposures as the shutter is not connected to the wind on mechanism.

Due to the number of cameras I received and the price of film, I wanted to try a few of the cameras in the cheapest way possible. Sometimes that makes the act of trying them more interesting for me. For this one it meant making a 127 film from a 35mm film with an adapted 120 backing paper. I have tried 35mm in a 127 camera before, but I have not adapted or created a new backing paper before. For the last try, I had already used a new 127 film and reused that roll. I left that backing paper in Japan, but luckily there were many 127 spools and a used 127 roll in one of the boxes. As it was my only one I wanted to preserve it for as long as possible. That was the main reason for trying to make a new backing paper from one of the many, cheaper 120 rolls papers in my possession.

So here is how to do that. As you can see in the photo below, an easy way to line things up is by using paper clips. The 120 roll is much longer than 127 so you can easily make the new end sections. Then cut, it doesn’t have to be precise. Test it by rolling it onto the spool without the film. This way you will see if it fits without damaging the film. On mine I found some sections slightly too big by millimetres but that didn’t affect the final results, a roll on a spool.

• 

• 

Next, before adding the film, I wrote the numbers on the new paper.

And then, tape the end of the 35mm film to the new paper so you can line it up as straight as possible, put two small pieces of sellotape on the back of your hand. You will need these pieces of tape once you put everything in the dark bag. One for the roll, one for the paper.

Before putting everything in a dark bag attach the end of the new 127 paper to the 127 spool and start to roll it as tight as possible until you get passed the end of the exposed film. Now with everything inside the dark bag, keep rolling the paper and releasing the 35mm film, keeping it as tight as possible without touching the film. Once you are close, but not at the end of the paper, cut and tape the end of the film to the paper with the tape you put on your hand. The other piece of tape is to keep the roll paper nice and tight when you removed it from the dark bag.

And finally load it in the camera of your choice, for me the Bullet, at your leisure.

I used my camera on a rainy walk to the bus station. There are just 8 shots so it didn’t take long. I developed it in Ilfosol 3 when I got home.

This time I managed to scan the sprockets by using a 120 mask and some tape. The long sides did curl up a little, but I sacrificed a little sharpness for the sake of saving my scanner plate from sticky residue.

I love the results and really liked the camera. It is the only one from the box that would actually fit into my pocket. Making the 127 roll was easy and cheaper than buying 127 film. I just had to remember to align the image in the center of the viewfinder as the results would not be square. There are other 127 cameras in the box so I will use this system again, unless I get some 127 film for Xmas 🙂